SIUI SR-8230S - Page 41

Use and Operation
6-2
No.
Control Part
Type
Functional Description
If an abnormal state occurs, it will also be
displayed in this area.
2
Status
indication
The exposure level 1 is ready.
When using the hand switch
, long press
the hand switch Level 1 till "
EXP1ST
" is
d
isplayed, which indicates that the
exposure level 1 is ready.
When using the exposure remote control
,
press the "
A
" key, the remote control
indicator turns on and the X-ray machine
makes a "Di" sound. Press the "
B
" key
within 3 seconds, the remote control
indicator turns on and the X-ray machine
makes a "Di" sound. Wait for "
EXP1ST
"
being displayed, it means exposure level 1
is ready.
3
Status
indication
The exposure level 2 display.
When using the hand switch
, long press
the hand switch Level 1 till "
EXP1ST
" is
displayed, then press and hold the hand
switch Level 2 till "
EXP2ND
" is displayed
and disappears, release the exposure
hand switch to complete one exposure.
When using the exposure remote control
,
press the "
A
" key, the remote control
indicator turns on and the X-ray machine
makes a "Di" sound. Press the "
B
" key
within 3 seconds, the remote control