SIUI SR-8230S - Page 48

Use and Operation
6-9
Menu
No.
Menu
Menu Function
Restore factory
defaults
8
Screen
Brightness
Adjust the screen brightness. 50%
9 Screen Flip
When On is selected, the screen
flips 180 degrees.
Off
10
Timing of
One-key
Exposure
One-key Ready Time and
One-key Delay Time
One-key Ready Time setting
: The
default value is 5 seconds. The
setting interval is [2, 15], and
each adjustment is increased by
1 second.
One-key Delay Time setting
: The
default value is 5 seconds. The
setting interval is [0, 60]. Each
adjustment is incremented by 1
second. When it is adjusted to 0,
no delay is performed and the
exposure is performed
immediately.
One-key Ready Time
setting: 5 seconds.
One-key Delay Time
setting: 5 seconds.
11 Wireless
The following wireless
parameters can be set:
1. Wireless function can be
turned on/off;
2. DR System Mode / Generator
Mode can be set;
3. In DR System Mode, up to 5
remote devices can be turned
on/off: communication IP
address, Remote/Local Port, and
local IP address of the X-ray unit;
4. In Generator Mode, the local