16
Unpacking and Set-Up Instructions
SW Evolution™ Unpacking and Set-Up
Unpacking/Parts Breakdown
Inspect for any signs of freight damage. If obvious damage is detected, contact the freight
company and file a damage complaint. It may be necessary to take pictures of the damage.
After visual inspection make sure all of the proper components have been received.
Items enclosed in the box:
Bed
Headboard
Footboard
Footboard Posts (2)
Headboard Posts (2)
Scale Meter
Scale Meter Holder
3/16” Allen Screws (4)
1/2” Screw (8)
Side Rails Mounts (2)
Mattress Bar & Locking Pin
Side Rails (2)
RSS System (optional)
Tools required for assembly:
Phillips Screwdriver
3/16” Allen Wrench
2- 15/16” Wrench
1/2” Socket Wrench
2- 9/16” Wrench
7/16” Wrench
DO NOT discard any packing material until all components are accounted for and are in good
condition.
WARNING: Failure to follow the set-up instructions could result in patient or
user injury as well as damage to equipment or other property.
To Next Page
Loading...
