18
LAST POINT realigns the Cutting Blade at the last point before Cutting Mat was unloaded. Reload the Cutting Mat,
press and the blade will align to begin cutting the next shape at the point where it ended. This function optimizes
the use of the cutting material.
Last Pt.
beyond the basics
You can also load/unload Cutting
Mat using the button on front right
side of Machine.
ACTUAL ignores scale and instead sizes selected shape at
selected size not relative to accompanying shapes.
Actual: Off Actual: On
USING ACTUAL WITH FONTS:
1 2
Pressing Actual key once = ON
Pressing again = OFF
Press . Select a shape and then
select a size. Press .
Selected piece will be cut at the
selected size and not relative to other
shapes.
USING ACTUAL WITH SHAPES:
1 2
Actual
to edit height to Esc
to apply to width
suggested min
height=4.0"
H: 4.00" W: 3.63" QTY: 1
Starter and Rockin’
Janie
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Solid
Outline
Shadow
Pieces
H: 4.00" W: 4.84" QTY: 1
Starter and Rockin’
Janie
All
ACTUAL
LOAD/UNLOAD
LAST POINT
LOAD/UNLOAD loads or unloads the Cutting Mat into or out of Machine using the Keypad.
To Next Page
Loading...
