15
Changing lubrication parameter settings using the function button
The function is always targeted at the channel selected for display.
The button allows users to set the lubrication interval, maximum pressurisation time and the required number of lubrication
pulses.
ST-102-
pressurisation timetables.
When J8 is in position 1, the time settings in accordance with tables J8:1 are in use.
When J8 is in position 2, the time settings in accordance with tables J8:2 are in use.
Selector switch J8 in position 1. J8:1 Selector switch J8 in position 2. J8:2
To Next Page
Loading...
Need help?
General
