screens available. The screen menu allows the user to congure and choose
which runtime screens to be included in normal operation. UP (↑) and DOWN
(↓) buttons will scroll to the available screens. By using the SET button, the
user can control each individual screen to ON or OFF. Screens set to ON are
available to be displayed by pressing the MENU button. Screens set to OFF will
not be displayed.
ON
OFF
CONFIGURING OF DATA SCREENS
The three user programmable screens can be set up using the conguration
(CONFG) menu. This submenu allows the user to select one of the three
displays. On entering the CONFG screen, the user can change the data type to
be displayed in each of the 4 screen positions. Up (↑) and down (↓) will change
the data type, SET will move to the next screen
position. The screen layout will depend on the
selected data type. Up to 4 lines of text and data
can be displayed on each screen. Placing TXT in
the bottom 4
th
line or 3
rd
and 4
th
line will cause the
data to spread out showing fewer data points. The
system will not allow you to mix speed data from
different sources on the same screen. Having 2
TXT lines after each other will also rearrange the
positioning.
Note: The Compact speed log system needs one screen which indicates
just the primary data. This screen is xed and cannot be adjusted.
The non-active parameters will continue showing the dimmed title data, when
not selected.
To Next Page
Loading...