To Next PageTo Next Page
Need help?Do you have a question about the Skipper EML224 and is the answer not in the manual?
General| Type | Temperature and Humidity Data Logger |
|---|---|
| Measurement Parameters | Temperature, Humidity |
| Humidity Range | 0% to 100% RH |
| Resolution (Humidity) | 0.1% RH |
| Interface | USB |
| Accuracy (Humidity) | ±3% RH |
| Resolution (Temperature) | 0.1°C |
| Battery Life | 1 year (typical) |
| Communication Interface | USB |
| Logging Interval | Adjustable from 2 seconds to 24 hours |
Introduces key chapters and appendices of the manual.
Guides on mounting the hull fitting for the sensor.
Details on selecting optimal sensor location and proper installation.
Covers sensor installation, positioning, and system cabling requirements.
Explains power supply options and digital inputs/outputs for alarm, pulse, dimming.
Recommends interface methods and shows simplified circuits for JB60CD.
Illustrates typical NMEA 0183 circuits for JB60CD-SA.
Explains finding mounting angle and speed error for calibration.
Details Manual and Semi-automatic calibration procedures.
Procedures for system diagnostics, error checks, and using test points.
Lists error codes, their meanings, and recommended troubleshooting steps.
