Skipper EML224 - NMEA Inputs; NMEA Alarm; Appendix 4; Sending the System for Repair

Date: 2017-01-12
Page 57 of 68
OpInMan EML224/DL1 Compact Speed Log System
Electronics AS
NMEA INPUTS
The following inputs are accepted
Dimming control DDC Remote dimming
GPS ZTG, ZDA
GGA
Time and date
Time and position
NMEA ALARM
This system has no requirement for alarms other than power failure. To
simplify cabling and use ithese previously avalable functions have been
removed in this version. THis ensures that IMO MSC302 is fulllled. If these
alarms are required the new generation Multi SKIPPER products fulll all
requirements
APPENDIX 4
sending the system for repair
__________________________________________________________________________
In the unlikely chance that a system fails, it may be necessary to send a part
of the system back for repair. Make contact with your local dealer or SKIPPER
for Returns Materials Authorisation number (RMA). (A list of service centres is
available on www.skipper.no).
For normal service/support, please contact SKIPPER Electronics AS on e-mail:
support@skipper.no, or contact our local dealer.
(List available on www.skipper.no).