Page 5 of 68
OpInMan EML224/DL1 Compact Speed Log System
important to know when using it.
appendix 2 – meChaniCal drawings
A picture is worth more than 1000 words! In addition to the text describing
installation, the mechanical drawings are included to allow correct installation.
appendix 3 – output formats
The system uses primarily NMEA 0183 standard. This section describes the
format of the messages used. It also describes the other digital signals in use.
appendix 4 - sending the system for repair
In the unfortunate case of a failure that requires a factory repair, the return
sequence described, should be followed.
appendix 5 - other options with the CompaCt display
The Compact speed log can be used in a number of different systems both as
a repeater and a speed log. This section explains what is available and how to
activate the options. The Compact speed log also contains a diagnostics port,
from which the user can obtain diagnostic information using hyperterm. This is
described here.
appendix 6 - support software
The Compact display is alphanumeric and as such, is restricted in the amount of
information it can display. SKIPPER Electronics AS is continuously developing
support tools to ease use of its products. The Compact system allows for the
user to extract additional information about the systems condition. This appendix
describes the software tools available that will aid this process.
To Next Page
Loading...