Skyjack SJ 8831E - Page 66

SECTION 5, Page 15SJ-800 Series E Battery Powered
119153
Table 5-5. Sevcontrol Test Sequence
Sevcontroller Adjustment And Diagnostics (Continued)
Drive Controller Test Sequence
Sequence
No.
Test Display
- Controller (Joystick) Input 0 to 100%
1 Forward Switch CL/OP
2 Reverse Switch CL/OP
3 Tachometer Input 0 to 100%
4 Elevated Position CL=Collapsed OP=Lifted
5 Tilt Switch CL=Level OP=Tilt
6 Pump/Traction Switch CL=Pump Mode OP=Traction
Mode
7 Actual Direction, Tachometer Output CL= Reverse OP=Forward
8 Lift Transmission Position Sense CL = Engaged OP = Disengaged
9 Traction Transmission Position Sense CL = Engaged OP = Disengaged
10 First Error Latch Value= Flash Code
NOTE: CL=Switch Closed
OP=Switch Open
60287AB