40
SJ30 AJE SJ30 ARJE213213AAA
Section 4 – Pre-operation Visual & Daily Maintenance Inspections
6
Battery trays
▪
Ensure tray latches
7
are secure and in
proper working order.
8
Batteries
▪
Proper battery condition is essential to
good performance and operational safety.
Improper uid levels or damaged cables and
connections can result in component damage
and hazardous conditions.
WARNING
Explosion hazard. Keep ames and
sparks away. Do not smoke near
batteries. Battery acid releases
explosive gas while charging. Charge
batteries in a well-ventilated area.
WARNING
Battery acid is extremely corrosive - Wear proper
eye and facial protection as well as appropriate
protective clothing. If contact occurs, immediately
ush with cold water and seek medical attention.
1. Check battery case for damage.
2. Ensure all battery connections are tight.
3. If applicable, check battery uid level. If plates
are not covered by at least 13 mm (1/2”) of
solution, add distilled or demineralized water.
WARNING
Use original or manufacturer-approved parts and
components for the MEWP.
9
Battery charger
▪
Ensure charger is secure and shows no visible
damage.
10
Pothole protection
▪
Ensure there are no visible cracks and there
are no signs of damage or deformation.
Rear side
Front side
68
9
7
10
To order go to Discount-Equipment.com