Skyjack SJ30 AJE - SJ30 AJE & SJ30 ARJE Labels

103 pages

Save Page as PDF

To Next Page

To Previous Page

SJ30 AJE SJ30 ARJE213213AAA

Section 8 – Labels SJ30 AJE & SJ30 ARJE Labels

Description Label Pictorial

Grease points maintenance

Refer to service and maintenance manual for lubricating MEWP.

Warning - Do not alter

Do not alter or disable limit switches or other safety devices.

Control compartment

To order go to Discount-Equipment.com

Main Page

Table of Contents5
Section 1 - about this Mobile Elevating Work Platform (MEWP)9
Read and Heed9
- Mobile Elevating Work Platform (MEWP) Definition9
- Purpose of Equipment9
- Use of Equipment9
- Manual9
- Operator9
- Service Policy and Warranty9
- Ownership of Machine9
- Optional Accessories9
- Scope of this Manual10
Major Assemblies11
- Base11
- Turret11
- Boom Assembly11
- Platform11
Serial Number Nameplate13
Responsibility for Maintenance13
- Operator's Responsibility for Maintenance13
- Maintenance and Inspection Schedule13
- Owner's Inspections13
Section 2 - Operator Safety14
Electrocution Hazard14
Safety Precautions15
Fall Protection17
Jobsite Inspection18
Section 3 - Familiarization19
Component Identification20
Manual Storage Box21
Control Functions21
- Main Power Connectors21
- Footswitch21
- Base Control Console22
- Platform Control Console23
Features and Devices25
- Lowered Travel Position and Elevated Travel Position25
- Drive Speed26
- Drive Direction26
- Tilt Switch26
- Function Restrictions When Tilted26
- Platform Load Sensing System26
- Overload Status27
- Brake System28
- Secondary Guarding Electrical (SGE)28
- 10 All Motion Alarm28
- 11 AC Outlet on Platform28
- 12 Pothole Protection29
Optional Equipment and Attachments30
- Work Light (if Equipped)30
- Flashing Amber Light (if Equipped)30
- 1000W/120V AC Inverter (if Equipped)31
- Elevate Telematics - Access Control Unit (if Equipped)32
Section 4 - Pre-Operation34
Operator's Responsibility34
Visual & Daily Maintenance Inspections35
- Labels35
- Electrical35
- Limit Switches35
- Hydraulic35
- Base36
- Control Compartment38
- Motor/Hydraulic Compartment39
- Platform Assembly40
- Boom Assembly41
- 10 Optional Equipment/Attachments42
Function Tests43
- Testing Main Power Connectors43
- Base Control Console44
- Testing Base Emergency Stop Light and Base Emergency Stop Button44
- Testing Function Enable Switch and All Boom Functions44
- Testing Platform Self-Leveling45
- Testing Emergency Power45
- Testing Base/Off/Platform Switch46
- Platform Control Console47
- Testing Secondary Guarding Electrical (SGE)47
- 10 Testing Platform Emergency Stop Light and Platform Emergency Stop Button49
- 11 Testing Footswitch49
- 12 Testing Steering49
- 13 Testing Driving Function49
- 14 Testing Driving Speed50
- 15 Verifying Load Sensing Module Self-Check50
- 16 Testing Emergency Power51
- 17 Testing Horn51
- 18 Testing Brakes51
- 19 Testing Manual Platform Leveling51
Operator's Checklist52
Section 5 - Operation53
Start Operation54
- Activating Base Control Console54
- Rotating Platform Using Base Control Console54
- Rotating Turret Using Base Control Console54
- Moving Jib up and down Using Base Control Console54
- Rotating Jib Using Base Control Console54
- Moving Riser up and down Using Base Control Console54
- Raising or Lowering Main Boom Using Base Control Console55
- Extending or Retracting Fly Boom Using Base Control Console55
- Leveling Platform Manually Using Base Control Console55
- 10 Operating Using Emergency Power Switch at Base Control Console55
- 11 Activating Platform Control Console55
- 12 Driving Forward or Reverse Using Platform Control Console56
- 13 Steering Using Platform Control Console56
- 14 Moving Jib up and down Using Platform Control Console56
- 15 Rotating Jib Using Platform Control Console56
- 16 Moving Riser up and down Using Platform Control Console56
- 17 Extending or Retracting Fly Boom Using Platform Control Console56
- 18 Rotating Platform Using Platform Control Console56
- 19 Leveling Platform Using Platform Control Console56
- 20 Raising or Lowering Main Boom Using Platform Control Console56
- 21 Sounding Horn57
- 22 Rotating Turret Using Platform Control Console57
- 23 Operating with Emergency Power Switch at Platform Control Console57
- 24 Shutdown Procedure57
- 25 Inverter (if Equipped)57
Section 6 - Additional Procedures58
Emergency Lowering Procedure58
Chassis Tilt Recovery59
- Platform Uphill59
- Platform Downhill59
Winching and Towing Procedure60
- Releasing Brakes Manually61
Loading/Unloading62
- Loading and Tie-Down62
- Lifting63
Battery Maintenance64
- Battery Service Procedure64
- Battery Charging Operation64
- Charging State LED65
Section 7 - Technical Drawings and Specifications66
Technical Diagrams67
Standard and Optional Equipment71
Owner's Annual Inspection Record72
Specifications and Features-A73
Specifications and Features-B74
Tire/Wheel Specifications74
Maximum Platform Capacities74
Floor Loading Pressure75
- Locally Concentrated Pressure (LCP)76
- Overall Uniform Pressure (OUP)76
Section 8 - Labels77
SJ30 AJE & SJ30 ARJE Labels78
- Control Side78
- Front Side85
- Top View87
- Platform Views88
- Motor/Hydraulic Side94
- Rear Side99
Section 9 - Unique Skyjack Features100

Skyjack SJ30 AJE - SJ30 AJE & SJ30 ARJE Labels

Table of Contents

Related product manuals