Skyjack SJ6832 RTE - 18 Do a Test of the SGLE Switch (Optional Equipment)

46
SJ6832 RTE
221844ACAI
Section 4 – Inspections Before Operation Function Tests
4.3-18 Do a test of the SGLE switch
(optional equipment)
WARNING
Look for overhead obstructions or other possible
hazards around the MEWP when you raise the
platform. Do not lower the platform unless the area
below is clear of personnel and obstructions. If
you do not obey, there is a risk of death or serious
injury.
1. Move the lift/off/drive switch
1
to the lift
position.
2. Do not squeeze the function-enable switch
2
or push the SGLE button
3
. Push and pull the
controller handle
4
to raise and lower the
platform.
▪
Result: The platform does not raise or lower.
3. Push and hold the SGLE button
3
only. Do not
squeeze the function-enable switch
2
. Push
and pull the controller handle
4
to raise or
lower the platform.
▪
Result: The platform does not raise or lower.
4. Push and hold the SGLE button
3
. Squeeze
the function-enable switch
2
. Push and pull
the controller handle
4
to raise or lower the
platform.
▪
Result: The platform raises and lowers.
5. Squeeze the function-enable switch
2
only.
Do not push the SGLE button
3
. Push and pull
the controller handle
4
to raise or lower the
platform.
▪
Result: The platform lowers, but does not
raise.
T
M
3
1
2
4