Skyjack SJ6832 RTE - Transporting and Maneuvering the MEWP

65
SJ6832 RTE
221844ACAI
Move the MEWP for transport Section 6 – Additional Procedures
6.5 Move the MEWP for
transport
When you drive a MEWP onto or remove it from a
transport vehicle, on a public road, give protection to
the person(s) involved. Protection can include:
▪
Warning cones
▪
Road signs and signaling devices
▪
Applicable personal protective equipment, such
as reflective clothing
▪
Flag personnel to warn other vehicles of the
MEWP and other related vehicles
▪
Other applicable control measures.
Obey all the national, state/provincial/territorial, and
local safety rules when you move the MEWP for
transport. Only qualified personnel with authorization
must drive the MEWP on to or remove it from a
transport vehicle.
Be sure the vehicle capacity and load equipment,
hoists, chains, straps, and other related items are
sufficient to withstand the maximum MEWP weight.
Park the transport vehicle on a level surface. Use
wheel chocks or blocks to prevent unintended vehicle
movement during this operation.
6.5-1 Lift the MEWP with a forklift
When you lift the MEWP, you must:
▪
Turn the main power disconnect switch to the
off position.
▪
Close and tightly latch the electrical and
hydraulic compartment door.
▪
Retract the extension platform. Correctly insert
the lock-pin(s).
▪
Attach the platform control console to the
mounting bracket, or remove the platform
control console
▪
Remove all personnel, tools, and materials from
the platform.
▪
Lift the MEWP with the forklift forks in the forklift
lift locations shown
1
.
1
Figure 04 Forklift lift locations
ZZ
P
S
I
/
B
A
R
M
A
N
U
A
L
=
�������
=
M
A
N
U
A
L
B
A
R
124631AC
��������
������
�
2
2
Figure 05 MEWP Center of Gravity