28
SJ6826 RT, SJ6832 RT
221587ABA
Section 3 – Familiarization Features and devices
FAMILIARIZATION
3.4-7 Fall-protection anchorage
1
1
Fall-protection anchorage: When required,
use this as a point to attach personal fall protection
equipment (PFPE). Do not attach the PFPE to
any other points on the platform. Do not use this
anchorage to lift, anchor, attach, or hold the platform,
or other apparatuses or material.
WARNING
Only use the fall-protection anchorage in the limits
of the platform. Do not use the fall-protection
anchorage for other than its intended function
(refer to section 2.3). If you use it incorrectly,
death, serious injury, and/or MEWP damage can
occur.
3.4-8 Platform load-sensing system
The platform load-sensing system prevents normal
MEWP movement when the platform is overloaded
and in a stationary position. Refer to section 7.4 for
platform capacities.
Load status Result
The platform is
near the rated load.
All functions are
available.
The light on the
emergency-stop button
flashes on the platform and
base control consoles.
The platform is
at the rated load.
All functions are
available.
The alarm sounds. The
light on the emergency-
stop button flashes on the
platform and base control
consoles.
The load on the
platform is more
than the rated load.
All normal MEWP
movement functions
are unavailable.
The light on the emergency-
stop button continues to
flash on the platform and
base control consoles.
The alarm continues
to sound at increased
frequency.
Remove the overload from the platform to continue
the normal operation.
WARNING
Fall hazard. Do not try to free a snagged platform
with the base controls until you remove all
personnel from the platform. If you do not obey,
there is a risk of death or serious injury.
To Next Page
Loading...
Need help?
General
