54
SJ6826 RT, SJ6832 RT
221587ABA
Section 4 – Inspections Before Operation Operator’s Checklist
Platform assembly - Do an inspection for loose, damaged, or missing
components
Platform railings
Fall-protection anchorages
AC power socket
Platform control console
Manual storage box
Lift mechanism - Do an inspection for loose, damaged, or missing com-
ponents
Sliders and rollers
Maintenance support
Scissor assembly
Scissor bumpers
Lift cylinders
Angle transducer
Optional equipment and attachments - Do an inspection for leaks and
loose, damaged, or missing components.
Function Tests
Do a test of the main power disconnect switch
Do a test of the emergency-stop button on the base
Do a test of the load-sensing module self-check
Do a test of the idle/platform/base key switch
Do a test of the emergency-lowering function
Do a test of the positive air shutoff (optional equipment)
Do a test of the platform emergency-stop
Do a test of the function-enable switch
Do a test of the steer function
Do a test of the drive function
Do a test of the anti-tiedown function
Do a test of the brakes
Do a test of the platform raise and lower functions
Do a test of the horn
Do a test of the elevated travel speed
Do a test of the SGLE switch (optional equipment)
Do a test of the outrigger interlocks (optional equipment)
Do a test of the auto-level (optional equipment)
Do a test of the generator (optional equipment)
Operator’s Checklist (page 2 of 2)
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
To Next Page
Loading...
Need help?
General
