53
SJ6826 RT, SJ6832 RT
221587ABA
Operator’s Checklist Section 4 – Inspections Before Operation
4.4 Operator’s Checklist
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
Labels - Do an inspection for damaged, or missing labels
Electrical - Do an inspection for loose, damaged, or missing components
Hydraulic - Do an inspection for loose, damaged, or missing components
Base - Do an inspection for loose, damaged, or missing components
Base weldment
Steer cylinder
Tie rod
Emergency-lowering access rod
Ladder
Outriggers (optional equipment)
Wheels/tires - Do an inspection for loose, damaged, or missing compo-
nents
Wheel/tire assembly
Whee nuts
Engine compartment - Do an inspection for loose, damaged, or missing
components
Main power disconnect switch
Base control
Engine compartment cover
Battery
Hydraulic pump
Radiator
Engine coolant
Muffler and exhaust
Engine and pivot tray
Engine oil level
Engine intake air filter
Belts
Propane tank (optional equipment)
Hydraulic compartment - Do an inspection for leaks and loose, damaged,
or missing components
Hydraulic compartment cover
Hydraulic tank
Hydraulic oil level
Hydraulic return filter
Fuel tank
Main manifold
Gear-type flow divider
Serial Number:
Model:
Hourmeter Reading:
Date:
Time:
N/A NOT APPLICABLE
Operator’s Name
(Printed):
Operator’s Signature:
Each item shall be inspected using the appropriate section
of the Skyjack operating manual. As each item is inspected,
check or complete the appropriate box.
Daily Operator’s Checklist
P PASS
Add a comment if the item does not pass inspection.
(page 1 of 2)
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
To Next Page
Loading...
Need help?
General
