EasyManuals Logo

Skyjack SJ68RT Series User Manual

Skyjack SJ68RT Series
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40
SJ6826 RT, SJ6832 RT
221587ABA
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
4.2-7 Hydraulic compartment
Do the inspection that follows:
WARNING
Environmental hazard. Immediately remove
gasoline, diesel fuel, engine oil, and hydraulic
fluid spills and leaks with rags. Discard these
rags in accordance with national, state/provincial/
territorial, and local regulations. Spilled fluids can
damage the environment. When spilled fluids go
into the water (for example, a sewage system,
streams, rivers, or other surface water), they can
kill aquatic life.
1
Hydraulic compartment cover
Make sure that the hinges and lockable latch
on the engine access door are latched tightly
and in good condition.
Make sure that the hinges have sufficient
lubrication.
2
Hydraulic tank
Make sure the hydraulic filler cap closes
tightly.
Make sure there is no visible damage or
hydraulic leaks.
3
Hydraulic oil level
Make sure the platform is fully lowered and the
outriggers are retracted.
Do a check on the gauge on the front of the
hydraulic oil tank. The hydraulic oil level must
be at or a small distance above the top mark
on the gauge.
4
Hydraulic return filter
Make sure that the filter is correctly attached.
Make sure there is no visible damage or
hydraulic leaks.
WARNING
Explosion or fire hazard. Do not smoke near the
fuel system. If you do not obey, there is a risk of
death or serious injury.
IMPORTANT
Before you use the MEWP, make sure there is
sufficient fuel for the estimated task.
5
Fuel tank
Make sure that the fuel filler cap closes tightly.
Make sure there is no visible damage to the
tank, gauge, hoses, or fittings.
Make sure there is no indication of fuel
leakage from the tank, gauge, hoses, fittings,
pump, and filter.
6
Main manifold
Make sure that all fittings and hoses are
correctly tightened.
Make sure there is no indication of hydraulic
leakage.
Make sure that there are no loose wires and
no missing fasteners.
7
Gear-type flow divider
Make sure that there are no loose or missing
parts.
Make sure there is no visible damage or
hydraulic leaks.
7
5
4
3
6
2
1

Table of Contents

Other manuals for Skyjack SJ68RT Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ68RT Series and is the answer not in the manual?

Skyjack SJ68RT Series Specifications

General IconGeneral
BrandSkyjack
ModelSJ68RT Series
CategoryScissor Lifts
LanguageEnglish

Related product manuals