EasyManuals Logo

Skyjack SJ68RT Series User Manual

Skyjack SJ68RT Series
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38
SJ6826 RT, SJ6832 RT
221587ABA
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
4.2-6 Engine compartment
Do the inspection that follows:
1
Main power disconnect switch
Turn the main power disconnect switch to the
off position.
Make sure the switch rotates and stays in the
on and off position.
Make sure the cables are not loose.
2
Base control
Make sure there is no visible damage, and all
the switches are in their off/neutral positions.
3
Engine compartment cover
Make sure that the engine access door is
latched tightly and in good condition.
Make sure that the hinges and lockable latch
on the engine access door are latched tightly
and in good condition.
Make sure that the hinges have sufficient
lubrication.
WARNING
Burn hazard. Do not touch hot engine components
without the correct PPE. Let the engine cool before
you do an inspection or servicing. If you do not
obey, there is a risk of death or serious injury.
4
Battery
WARNING
Explosion hazard. Keep flames and sparks away.
Do not smoke near the batteries. Batteries release
explosive gas while you charge them. Charge the
batteries in a well-ventilated area. If you do not
obey, there is a risk of death or serious injury.
WARNING
Corrosion hazard. Do not touch battery acid. Wear
the correct PPE. If the battery acid touches you,
immediately flush the area with cold water and get
medical aid.
1. Do an inspection of the battery case for
damage.
2. Make sure all the battery connections are
tight.
3. If applicable, check the battery fluid levels. If
the plates do not have a minimum 13 mm
(1/2 inch) of solution above them, add
distilled or demineralized water.
WARNING
Only use original or manufacturer-approved parts
and components for the MEWP. If you do not obey,
there is a risk of death, serious injury, or machine
damage.
WARNING
Burn hazard. Do not touch hot engine components
without the correct PPE. Let the engine cool before
you do an inspection or servicing. If you do not
obey, there is a risk of death or serious injury.
4
1
2
3

Table of Contents

Other manuals for Skyjack SJ68RT Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ68RT Series and is the answer not in the manual?

Skyjack SJ68RT Series Specifications

General IconGeneral
BrandSkyjack
ModelSJ68RT Series
CategoryScissor Lifts
LanguageEnglish

Related product manuals