Skyjack SJ68RT Series User Manual

49
SJ6826 RT, SJ6832 RT
221587ABA
Function Tests Section 4 – Inspections Before Operation
4.3-16 Do a test of the SGLE switch
(optional equipment)
WARNING
Look for overhead obstructions or other possible
hazards around the MEWP when you raise the
platform. Do not lower the platform unless the area
below is clear of personnel and obstructions. If
you do not obey, there is a risk of death or serious
injury.
1. Start the engine.
2. Move the lift/off/drive switch
4
to the lift
position.
3. Do not squeeze the function-enable switch
1
or push the SGLE button
13
. Push and pull the
controller handle
2
to raise and lower the
platform.
▪
Result: The platform does not raise or lower.
4. Push and hold the SGLE button
13
only. Do not
squeeze the function-enable switch
1
. Push
and pull the controller handle
2
to raise or
lower the platform.
▪
Result: The platform does not raise or lower.
5. Push and hold the SGLE button
13
. Squeeze
the function-enable switch
1
. Push and pull
the controller handle
2
to raise or lower the
platform.
▪
Result: The platform raises and lowers.
6. Squeeze the function-enable switch
1
only.
Do not push the SGLE button
13
. Push and pull
the controller handle
2
to raise or lower the
platform.
▪
Result: The platform lowers, but does not
raise.
T
M
13
10
9
8
6
5
4
3
1
7
2

Skyjack SJ68RT Series Specifications

General

Brand	Skyjack
Model	SJ68RT Series
Category	Scissor Lifts
Language	English