Need help?Do you have a question about the SL Analytics TitroLine 5000 and is the answer not in the manual?
General| Model | TitroLine 5000 |
|---|---|
| Manufacturer | SI Analytics |
| Dosing Resolution | 0.001 mL |
| pH Resolution | 0.001 pH |
| mV Resolution | 0.1 mV |
| Temperature Resolution | 0.1 °C |
| Burette resolution | 0.001 mL |
| Titration Methods | Acid-base, redox, complexometric, precipitation |
| pH Measurement Range | -2.0 ... +20.0 pH |
| mV Measurement Range | -2000 to 2000 mV |
| Temperature Measurement Range | -5.0 to 105.0 °C |
| Interface | USB, RS-232 |
| Power Supply | 100-240 V, 50/60 Hz |
Important notes for safe and proper operation of the titrator.
Overview of the TitroLine® 5000's capabilities and applications.
Detailed technical specifications, including measurement inputs and power supply.
Crucial safety warnings and guidelines for operating the titrator.
Guide on connecting essential accessories like the piston burette and stirrer.
Steps to perform an automatic titration, including sample ID and weight entry.
Procedure for calibrating the pH electrode using buffer solutions.
Guide to performing manual titrations using the controller or keyboard.
How to perform a dosing operation with or without a pre-defined method.
Configure method type, titration mode, parameters, results, and documentation.
Configure pH electrode calibration, buffer selection, and temperature.
Procedure for updating the device's software via USB.
To Next Page