146
5.12 Software Update
Fig. 154
An update of the device software requires a USB stick containing a new version. For this operation,
the two files that are needed have to be located in the root directory of the USB device:
Plug the USB device into a free USB-A port, wait for some seconds, and then select the Software
Update function. The valid software updates will be shown on the display. In the present case this is
Version ā14_38ā which means week 38 from 2014.
Fig. 155 a
After starting the update using <OK/ENTER>, next thing to appear is the following graphic:
To Next Page
Loading...