106
4.2 Default methods
The <Default methods> item of the TitroLine® 5000 contains a series of ready-made standard
methods which can be conveniently selected (Fig. 51).
Fig. 51
Once the selection made, you are directly prompted for the input of the method name.
Fig. 52
The standard name may be adopted or modified. Subsequently, you will be taken to the <Change
method parameters> item. Please continue at this point with Chapter 4.6.
4.3 Copy Methods
Methods can be copied or stored with a new name. If you select this function, the current method will
be copied and you can include a new name
Fig. 53
A new name with the suffix [1] is assigned automatically in order to avoid the existence of two methods
having the same name. Subsequently, you will be taken to the <Change method parameters> item.
Then you proceed with Chapter 4.6.
To Next Page
Loading...