Charging your watch
• Before charging, make sure the charging port is clean and dry.
• Using other companies chargers may result in slow charging
and/or overheating. Use the included USB charging cable.
Step 1: Align the charging pins of the USB charger with the
charging contacts of the smartwatch, and place the smart-
watch into the charging case to secure it.
Charging time
It takes about 2 hours to fully charge your watch. Remove
your watch from the charging cable once it is fully charged.
Step 2: Connect the USB end of the charging case into a USB
power source. When connected successfully, you will see the
charging indication on the watch screen.
1
2
EN 7
To Next Page
Loading...
