SMA America, LLC 5 Mounting
Installation Manual SB30-40-US-IA-en-33 25
5Mounting
5.1 Safety during Mounting
Risk of injury due to inverter falling over
Potential risk of bruising and broken bones due to the heavy weight of the inverter.
• When mounting the inverter, note that it has a weight of 88 lb. (40 kg).
• Use appropriate mounting material for the mounting location of the inverter:
– For mounting on plasterboard, do not use hollow-wall anchors or toggle bolts.
– Wooden supporting studs or posts must be present behind the mounting points on
plasterboard.
• Use suitable lifting device when mounting.
The inverter can become hot during operation
Potential burn injuries when touching the enclosure.
• Install the inverter in such a way that it cannot be touched accidentally.
To Next Page
Loading...
