5 Mounting SMA America, LLC
34 SB30-40-US-IA-en-33 Installation Manual
5.7 Mounting the Inverter
1. Transport the inverter using the side handles and
hook the inverter into the wall mounting bracket
from above. Ensure that the inverter is positioned in
the center of the wall mounting bracket.
2. Screw the inverter onto the wall mounting bracket
on both sides using the provided screws with
conical spring washers (torque: 44 in-lb. (5 Nm)).
3. Close the recessed grips with the ventilation grids.
Ensure that the side assignment is correct. Each
ventilation grid is assigned to a side of the
enclosure: Left side "links⁄left" and right side
"rechts⁄right".
To Next Page
Loading...
