11 Cleaning and Care SMA America, LLC
80 SB30-40-US-IA-en-33 Installation Manual
• Unlock and remove the fan plug.
5. Insert the fan plug into the jack until it snaps into
place.
6. Insert the fan into the inverter until the fan audibly snaps into place.
7. Press the fan guard into the retainer until it audibly snaps into place.
8. Commission the inverter (see Section 8).
Damage to the fan due to compressed air
• Clean the fan with a soft brush, a paint brush, or a damp cloth.
To Next Page
Loading...
