13 Decommissioning the Inverter
SMA Solar Technology AG
Operating Manual STPx0-3SE-40-BE-en-10 119
18. If the protective cover for the connection area is still in place, reattach the protective cover to
the inverter. Otherwise, protect the connection area with another sturdy cover.
19. Remove the inverter by lifting it vertically up and off the wall mounting bracket.
20. Unscrew the screws for fastening the wall mounting bracket and remove the wall mounting
bracket.
21. If the inverter is to be stored or shipped, pack the inverter, the AC connectors, the DC
connectors, the antenna, the RJ45 protective sleeve, the battery connection cables, the
connector for connecting the battery communication and the digital inputs and outputs, and
the wall bracket. Use the original packaging or packaging that is suitable for the weight and
dimensions of the inverter.
22. Dispose of the inverter in accordance with the locally applicable disposal regulations for
electronic waste.
To Next Page
Loading...
