2| INSTALLING YOUR SMART BOARD 685IX PREMIUM INTERACTIVE
WHITEBOARD SYSTEM
– Installing the ECP and projector cables and the guest computer harness on
page 6
– Installing the computer cables on page 8
– Installing SBA speakers and cables on page 9
– Installing additional cables on page 10
– Installing the UX60 projector on page 10
– Mounting the interactive whiteboard on page 12
• Completing your installation on page 13
– Aligning your interactive whiteboard with the projector on page 13
– Attaching the ECP module on page 13
– Installing the pen tray on page 14
– Mounting the guest computer harness on page 14
• Orienting your interactive whiteboard on page 16
– Setting orientation precision on page 16
– Orienting the interactive whiteboard system on page 17
Before installing the SMART Board 685ix
interactive whiteboard system
Environmental requirements
Before installing your system, refer to the environmental requirements in the SMART
Board™ 685ix Interactive Whiteboard System Configuration and User’s Guide,
document 99-00984-20, provided with your system.
Verify the installation of the FUWM-600 wall mount and the
computer
You must complete the installation of the FUWM-600 wall mount and the computer
before you can install the UX60 projector, the SMART Board 658 interactive
whiteboard and the ECP. Refer to the FUWM-600 Computer installation guide,
document 99-01035-20, provided with your FUWM-600 unit for more information.
To Next Page
Loading...
