docs.smarttech.com/kb/171897 9
Chapter 2 Installing and maintaining
the display
Is this the first time you’ve installed or maintained a SMART Board interactive display? 9
Installing the display 10
Installing SMART OPS appliances 11
Connecting to a network 11
Connecting power and turning on the display for the first time 13
Adjusting the display’s settings 14
Updating iQ system software 14
Is this the first time you’ve installed or maintained a
SMART Board interactive display?
If you haven’t installed or maintained a SMART Board interactive display before, refer to the SMART
Board interactive display installation and maintenance hub for general instructions and best practices
for installing and maintaining a display, including:
l
Moving the display to the installation site
l
Mounting the display on a wall, floor stand, or mobile stand
l
Configuring the display after installation
l
Regularly cleaning and maintaining the display to keep it in the best possible condition
Important
Before you clean the display’s screen, shut down or disconnect the computer. Otherwise, you may
scramble the desktop icons or inadvertently activate applications when you wipe the screen.
To Next Page
Loading...
