The Smart Temp 44-800 “Apollo” is a feature-rich touchscreen thermostat that can
be battery powered or hardwired to the HVAC equipment. Using a common sense
approach to the installation will ensure this product is installed properly and to the
customer’s satisfaction. Please take time to read and understand this manual so
that installation and testing is performed in an efficient manner.
This manual is to be used in conjunction with the supplied User Manual.
Although great care has been taken in the preparation of this manual, Smart
Temp Aust P/L takes no responsibility for errors or omissions contained
herein. It is the responsibility of the installer to ensure that this thermostat
and the equipment connected to it operate in a safe and efficient manner.
Due to ongoing product improvements, Smart Temp reserves the right to change the
specifications of the 44-800 thermostat or its components without notice.
All rights reserved.
© Smart Temp Australia P/L.
Intellectual rights apply.
INTRODUCTION
6
To Next Page
Loading...
