To insert an SD/SDHC card
1.
Press the button on the control panel.
2. Insert an SD/SDHC card into the card slot on the right-side connection panel with the contact
facing down.
I M P O R T A N T
l You might need to set your document camera to use the SD/SDHC card as the storage
location (see The Setting tab on page 39).
l Ensure the label on the SD/SDHC card is facing up.
To remove an SD/SDHC card
C A U T I O N
To prevent memory card damage, do not remove the memory card while capturing or deleting
images.
1.
Press the button on the control panel and wait until your document camera displays a live
image.
2. Push in the card to eject it, and then remove the card.
C H A P T E R 3
Using your SMARTDocumentCamera
29
To Next Page
Loading...
