SMART 450 - Capturing and Transferring Images and Videos; Capturing Images

System options Description
Output Display Set the resolution to display an image on the screen:
o
1024 × 768
o
1280 × 1024
o
1280 × 720
o
1920 × 1080
N O T E
This selection disabled in TV output mode.
Backup
o
SD/SDHC – copy images and presentations from the
build-in memory to an SD/SDHC card
o
USB drive – copy images and presentations from the
build-in memory to a USB drive
Save Settings Save the current setting in the selected profile number.
N O T E
Only effect, mode, brightness and contrast settings can be
saved.
Recall Settings Restore the setting to the selected profile number.
Information Display the product information.
Default Restore all the settings to the factory default settings.
Capturing and transferring images and videos
You can capture images and videos from your document camera to an SD/SDHC card or USB drive
and transfer them to a computer.
Capturing images
You can capture images and videos to an SD/SDHC card or USB drive when your document camera
is in Camera mode.
To capture images to memory
1. Set your document camera to Camera mode. See Using Camera mode on page 31.
2. Position your document camera.
3. Adjust any camera settings using the Camera mode’s OSD menu. See Using Camera mode on
C H A P T E R 4
Using your SMARTDocumentCamera in Camera mode
43