SMART 450 - Playback Mode

Settings options Description
Flicker Select refresh rate:
o
50 Hz – sets frequency to 50 Hz
o
60 Hz – sets frequency to 60 Hz
Playback mode
Playback mode sets how your document camera, computer and a memory card interact.
To access the Playback mode
1.
Press the button on the control panel.
2.
Press the button on the control panel.
3.
Press the button on the control panel to select , and then press the button on the
control panel.
4.
Press the button on the control panel to select USB to PC, and then press the button
on the control panel.
5.
Select STORAGE, and then press the button on the control panel.
Action Storage Camera
See the memory card from your computer Yes No
View and use your document camera from SMARTNotebook
software
No Yes
Capture image to the memory card in both Computer Pass-
Through and Camera modes
No Yes
This mode enables you to see the contents of your USB drive or SD memory card from your
computer.
The mass storage mode enables you to see the contents of the embedded memory or SD/SDHC
card from your computer. They will show up as removable disks. Look in the document camera DCIM
directories for the stored images and videos.”
C H A P T E R 4
Using your SMARTDocumentCamera in Camera mode
41