SMART Board 6000 Pro Series Installation And Maintenance Guide

APPENDIX B
USING THE ON-SCREEN DISPLAY MENU
93 smarttech.com/kb/171167
Sound menu options
Option Values Function Notes
Volume
0–100 Sets the volume [N/A]
Balance
L50–R50
OR
-50–50
Balances the left and right volume [N/A]
Sound Reset
[N/A] Resets all options in the Sound
menu to their default values
[N/A]
OSD menu options
Option Values Function Notes
Language
[Languages] Sets the on-screen display menu’s
language
[N/A]
OSD Turn Off
Off
5 seconds
10 seconds
15 seconds
Sets the time of inactivity before the
on-screen display menu turns off
[N/A]
OSD Reset
[N/A] Resets all options in the OSD menu
to their default values
[N/A]
Setup menu options
Option Values Function Notes
Power Save
On
Off
Enables or disables PowerSave
mode
When Power Save mode is enabled
and there is no video input,
NoSignal appears on the screen
for 25 seconds before the display
turns off.
Monitor ID
1–100 Specifies a unique ID for the display [N/A]
FBCControl
On
Off
Enables or disables the front
control panel
[N/A]
Wake to Touch
On
Off
Enables or disables the ability to
wake the display by touching the
screen
[N/A]
Proximity
On
Off
Enables or disables presence
detection
[N/A]
Re-enable Time
1Min.–10Min. Sets how long the display waits
before detecting motion again
[N/A]

SMART Board 6000 Pro Series Specifications

General

Brand	SMART
Model	Board 6000 Pro Series
Category	Monitor
Language	English