APPENDIX C
REMOTELY MANAGING THE DISPLAY
109 smarttech.com/kb/171167
Command Response Possible values Standby
mode
get red red=[Value] 0–100 No
get green green=[Value] 0–100 No
get blue blue=[Value] 0–100 No
get localdimming
3
localdimming=[Value] on
off
No
Use the following commands to assign video settings.
Command Possible values Response Standby
mode
set displaymode [Value] =standard
=user
=dynamic
displaymode=[Value] No
set contrast [Value] + [Incremental value]
- [Incremental value]
=0–100
contrast=[Value] No
set brightness [Value] + [Incremental value]
- [Incremental value]
=0–100
brightness=[Value] No
set sharpness [Value] + [Incremental value]
- [Incremental value]
=0–100
sharpness=[Value] No
set colortemp [Value] =normal
=warm
=cool
=user
colortemp=[Value] No
set red [Value] + [Incremental value]
- [Incremental value]
=0–100
red=[Value] No
set green [Value] + [Incremental value]
- [Incremental value]
=0–100
green=[Value] No
set blue [Value] + [Incremental value]
- [Incremental value]
=0–100
blue=[Value] No
set localdimming [Value]
4
=on
=off
localdimming=[Value] No
3
SPNL-6075, SPNL-6275, SPNL-6075P and SPNL-6275P only
4
SPNL-6075, SPNL-6275, SPNL-6075P and SPNL-6275P only
To Next Page
Loading...
Need help?
General
