SMART EQ forfour 2018 - Page 115

X
Press 9 or : to scroll to Settings.
X
Press 9 or : to scroll to the
desired menu.
X
Press 9 or : to set the desired
value.
X
Press a to confirm.
Resetting values
To reset the values in the respective dis-
plays, select the following:
X
Press a.
X
Select yes and press a to confirm.
Setting the time
X
Select Settings > Time > Set the time.
X
Set the values.
Vehicles with smart Media-System: if
available, the time and time format are
set in the smart Media-System.
Setting the time format
X
Select Settings > Time > Time format
(12/24 h).
X
Set the value.
Adjusting the instrument lighting
X
Select Settings > Display > Display/
switch brightness.
X
Set the value.
Displaying the digital speedometer in
the header
X
Select Settings > Display > Digital
speedometer.
X
Select the Disp. addit. dig. speedo.
function.
The digital speedometer is displayed in
the header.
UK only: the digital speedometer in the
header cannot be hidden.
Setting the unit for speed in the digital
speedometer
X
Select Settings > Display > Digital
speedometer > Unit.
X
Set the value.
The following values are set:
R
Digital speedometer display
R
Digital speedometer in the header
UK only: only the display unit of the digital
speedometer is set.
Setting the unit of measurement for
distance
X
Select Settings > Display > Units of
distance.
X
Set the value.
Setting the temperature unit of meas-
urement
X
Select Settings > Display > Units of
temperature.
X
Set the value.
Switching radar-based recuperation off
and on
To switch on radar-based recuperation, the
conditions for activation must be fulfilled
and the ignition must be switched on.
X
Select Settings > Radar assist. recu‐
peration > on or off.
Information on radar-based recuperation
(Y page 72).
Activating/deactivating Active Brake
Assist
The ignition must be switched on in order
to set Active Brake Assist.
X
Select Settings > Active Brake Assist >
on or off.
Information on Active Brake Assist
(Y page 59).
Setting values
113
>> Operating the on-board computer.
Z