X
Select Speed Vol..
X
Select the desired level.
The higher the level, the higher the vol-
ume will be at increasing road speeds.
Listening to the radio
Switching on the radio
X
Press the Ü button.
X
Press the $ button.
The smart Audio-System receives data
transmitted via the Radio Data System
(RDS).
Setting the waveband
X
Press the $ button repeatedly until
the desired waveband appears.
If available, you can switch between the
following wavebands:
R
FM1
R
FM2
R
DR1 (digital radio)
R
DR2 (digital radio)
R
AM
Selecting stations manually
FM and AM waveband
X
Press the D or C button to set the
desired frequency.
Digital radio frequency range
X
To select the desired station, press the
D or C button.
Setting a station from the station list
X
Press a in radio mode.
The station list appears.
X
Select a station.
X
Press a to confirm.
Updating the station list
X
Press the $ button until you hear a
tone.
Storing a station
X
Select the waveband.
X
Set the station.
X
Press a number key 1 to 6 until you
hear a tone.
The station set for this waveband will be
stored on the button you have pressed.
Selecting a stored station
X
Select a waveband.
X
Press a number key for the stored station.
Switching traffic announcements
on/off
X
Press the ª button.
X
Select Radio.
X
Select TA.
X
Select ON or OFF.
Interrupting a traffic announcement
X
During a traffic announcement, briefly
press %.
Displaying radio text in FM radio
X
Press the F button.
If radio text is available, it will be dis-
played.
Digital radio (if available)
Information on DAB
i
Any electronic devices taken into the
vehicle may seriously impair radio and
DAB radio reception.
Listening to the radio
117
>> Using the smart Audio-System.
Z
To Next Page
Loading...
Need help?
General
