EasyManuals Logo

SMART EQ forfour 2018 User Manual

SMART EQ forfour 2018
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Switching on the lighting
Useful information
The driver must ensure that the light set-
tings match the current weather, light and
traffic conditions.
For reasons of safety, smart recommends
that you drive with the daytime driving
lights or dipped-beam headlamps switched
on even during the daytime.
A warning tone sounds if the lights are still
on when you leave the vehicle.
In some countries, operation of the head-
lamps varies due to legal requirements and
non-compulsory stipulations.
:
Combination switch control
;
Marking
Activating automatic headlamp mode
G
WARNING
When the light switch is set to Ã, the
dipped-beam headlamps may not be
switched on automatically if there is fog,
snow or other causes of poor visibility
due to the weather conditions such as
spray. There is a risk of an accident.
In such situations, turn the light switch
to L.
While the engine is running, the light set-
ting is selected automatically according to
the brightness of the ambient light. Ã
controls the daytime driving lights, side
lamps and dipped-beam headlamps. The
automatic headlamp feature is only an aid.
The driver is responsible for the vehicle's
lighting at all times.
X
Turn combination switch control : to
the à position.
When one or more of the following occurs,
the lights are switched off automatically:
R
the engine is switched off
R
the driver's door is opened
R
the vehicle is locked
R
the main-beam headlamps are not
switched on when the vehicle is station-
ary
Switching on the dipped-beam head-
lamps
X
Turn combination switch control : to
the L position.
The L indicator lamp lights up in the
instrument cluster.
Switching the main-beam headlamps
on or off
The engine must be running.
X
Turn the combination switch control to
the à or K position.
X
To switch on: press the combination
switch in the direction of arrow 1.
X
To switch off: move the combination
switch back to its normal position.
The K indicator lamp in the instrument
cluster lights up when the main-beam
headlamps are switched on.
Switching on the lighting
89
>> Ensuring good visibility.
Z

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMART EQ forfour 2018 and is the answer not in the manual?

SMART EQ forfour 2018 Specifications

General IconGeneral
BrandSMART
ModelEQ forfour 2018
CategoryAutomobile
LanguageEnglish

Related product manuals