X
Pull loop : and fold the seat cushion
forwards.
Removing the cargo box (readyspace
seats)
X
Release the cargo box using handle :.
X
Using both hands, reach into the handle
recesses at the front and behind and
push the cargo box forwards and up at a
slight angle.
X
Remove the cargo box.
Removing/fitting the charging cable
bag
Removing the charging cable bag
X
Turn both buttons : to the left.
The buttons are released from the
anchorage.
X
Fold the charging cable bag to the left.
The Velcro fasteners under the charging
cable bag are detached.
X
Remove snap hook ;.
Installing the charging cable bag
X
Place the charging cable bag with its side
resting on the engine compartment cover
and then position it on the side trim.
X
Position the charging cable bag in a ver-
tical position.
Take hold of the Velcro fasteners beneath
the charging cable bag.
X
Push both buttons : into the anchorage
and turn them to the right.
X
Secure snap hook ;.
Removing/fitting the charging cable bag
157
>> Loading and stowing.
Z
To Next Page
Loading...
