SMART EQ forfour 2018 - Technical Data; Obtaining Technical Data; Reading Vehicle Data

Obtaining technical data
Information on technical data: http://
www.smart.de
The technical data was determined in
accordance with EU Directives. All data
applies to the vehicle's standard equip-
ment. Differences will be present in the
case of vehicles with optional equipment.
Further information is available from any
smart Centre.
Reading vehicle data
Useful information
Please observe the following notes for the
specified vehicle data:
R
Items of optional equipment reduce the
maximum payload
R
Vehicle-specific weight information can
be found on the vehicle identification
plate.
R
For certain countries only: you can find
vehicle-specific vehicle data in the COC
(CERTIFICATE OF CONFORMITY) docu-
ments. These documents are delivered
with your vehicle.
Vehicle identification plate
:
Vehicle identification plate position
:
Vehicle identification plate
;
Vehicle manufacturer
=
EU type approval number
?
Vehicle identification number (VIN)
A
Maximum permissible gross weight
B
Maximum permissible gross weight of
the vehicle combination
C
Maximum permissible front axle load
D
Maximum permissible rear axle load
E
Paint code
i
The data shown on the vehicle identifi-
cation plate is example data. This data is
different for every vehicle and can devi-
ate from the data shown here. The data
applicable to the vehicle is found on the
vehicle's identification plate.
Vehicle identification number (VIN)
X
Slide the right-hand front seat to its
rearmost position.
X
Fold floor covering : upwards.
VIN ; is located there.
The VIN can also be found on the vehicle
identification plate.
Reading vehicle data
213
>> Technical data.