Warning stickers
Always pay attention to the instructions
and safety notes on "Changing a wheel"
(Y page 162).
Vehicles with steel wheels and hub caps:
X
Using both hands, grasp two hub cap
openings and remove the hub cap.
Vehicles with steel wheels and hub cap
cover:
X
Remove the hub cap cover.
:
Wheel wrench
X
Using wheel wrench : loosen the wheel
bolts by about one turn. Do not unscrew
the wheel bolts completely.
;
Jack
=
Reinforced area for the jacking points
Jack ; may only be positioned on the
reinforced area intended for this purpose
for jacking points =.
The vehicle may be damaged if jack ; is
positioned at another point on the sill.
=
Reinforced area for the jacking points
?
Triangular indentation
A
Outer covering of the sill
164
Changing a wheel
>> Maintenance and care.
To Next Page
Loading...
