Securing the vehicle against rolling
away
Securing on level ground
X
When changing a wheel, place chocks or
other suitable items under the front and
rear of the wheel that is diagonally oppo-
site the wheel you wish to change.
Securing on a downhill gradient
X
Place wheel chocks or other suitable
items in front of the wheels of the front
and rear axle.
Using the warning triangle
Removing the warning triangle
Warning triangle : is located in the boot
behind the seat backrest, secured to the
carpet with a Velcro fastener. Return it to
this location after use.
X
Remove warning triangle : from the
boot.
Setting up the warning triangle
X
Fold feet 3 out to the side.
X
Pull side reflectors 2 upwards to form a
triangle.
X
Connect the reflectors using upper stud
1.
X
Place the warning triangle at a suitable
distance.
Securing the vehicle in the event of an accident or a breakdown
177
>> Dealing with accidents and breakdowns.
To Next Page
Loading...
