higher speeds. There is a risk of an acci-
dent.
Adapt your driving style accordingly and
drive carefully. Do not exceed the maxi-
mum permissible speed for a tyre sealed
with tyre sealant.
The maximum permissible speed for a tyre
sealed with tyre sealant is 80 km/h.
!
After use, excess tyre sealant may run
out of the filler hose. This could cause
stains.
Therefore, place the filler hose in the
plastic bag that contained the TIREFIT
kit.
H
Environmental note
Have the used tyre sealant bottle dis-
posed of professionally, e.g. at a qualified
specialist workshop.
Comply with the manufacturer's safety
instructions on the sticker on the tyre
inflation compressor.
Using tyre sealant
X
Leave foreign bodies which have pene-
trated the tyre in the tyre.
X
Remove the vehicle tool tray.
X
Remove the TIREFIT kit, consisting of a
tyre sealant bottle and a tyre inflation
compressor, from the vehicle tool kit.
X
Affix the 80 km/h maximum speed sticker
to the instrument cluster within the driv-
er's field of vision.
X
Unwind plug : with the cable from tyre
inflation compressor ;.
X
Remove hose A from the bottom section
of tyre inflation compressor ;.
X
Unscrew the cap from tyre sealant bot-
tle ?.
X
Connect hose A.
X
Remove the valve flap from valve E on
the faulty tyre.
X
Unscrew the cap from filler hose =.
X
Screw filler hose = onto valve E.
X
Insert connector : into the cigarette
lighter socket or the 12 V socket.
X
Turn the key to position 1 in the igni-
tion lock.
X
Press on/off switch B on tyre inflation
compressor ; to position 1.
The tyre sealant is pumped into the tyre.
The pressure may briefly rise to approx-
imately 600 kPa (6.0 bar/87 psi) in pres-
sure gauge C.
i
Preventing damage to the tyre inflation
compressor
Do not switch off the tyre inflation com-
pressor during this phase.
X
Let the tyre inflation compressor run for
a maximum of 15 minutes, then allow it to
cool down.
The tyre pressure must be at least 180 kPa
(1.8 bar/26 psi) in pressure gauge C.
Allow any leaking tyre sealant to dry. It can
then be removed like a layer of film.
Have any clothing stained with tyre sealant
cleaned as soon as possible with perchloro-
ethylene.
180
Sealing tyres using the TIREFIT kit
>> Dealing with accidents and breakdowns.
To Next Page
Loading...
