egory. These child restraint systems
must also be secured using Top Tether or
a supporting bracket.
R
Semi-Universal: child restraint systems
in the "semi-universal" category may
only be used if the vehicle and the seat
are listed in the child restraint system
manufacturer's vehicle model list.
R
Vehicle-specific: child restraint systems
in the "vehicle-specific" category may
only be used if the vehicle and the seat
are listed in the child restraint system
manufacturer's vehicle model list.
Approval categories in accordance with
UN-R129
Example of an approval label
R
i‑Size: child restraint systems in the
"i‑Size" category are approved for instal-
lation in vehicles with i‑Size securing
rings. They can be used, in accordance
with overviews of the suitability of seats
for securing child restraint systems, on
seats labelled i-U.
The designation i-U refers to i-Size child
restraint systems in the "Universal" cat-
egory. These child restraint systems
must also be secured using Top Tether or
a supporting bracket.
Observe the suitability of vehicle seats
Depending on the approval category, there
are forward-facing and/or rearward-facing
child restraint systems. Usage may be limi-
ted for certain vehicle seats.
R
Suitability of the seats for attaching ISO-
FIX child restraint systems (Y page 49)
R
Suitability of the seats for attaching
i‑Size child restraint systems
(Y page 51)
R
Suitability of the seats for attaching
belt-secured child restraint systems
(Y page 55)
Securing the ISOFIX or i-Size child restraint system
Suitability of the seats for attaching ISOFIX child restraint systems
ISOFIX identification
ISOFIX is a standardised securing system for special restraint systems.
R
This symbol indicates which seats are suitable for securing an ISOFIX
child restraint system in accordance with UN-R44 (Y page 48).
R
Only secure child restraint systems approved by UN-R44 in accordance
with the following ISOFIX tables.
Travelling safely with children in the vehicle
49
>> Safety.
Z
To Next Page
Loading...
