SMART high line radio - Adjusting the Volume; Adjusting the Sound Settings

direction on the map during route
guidance.
or
X
Switch on voice output via the settings
menu (Y page 41).
Adjusting the volume
Adjusting the volume for the audio or video
source
X
Turn cVd the control knob.
Adjusting the volume for the traffic
announcements and navigation
announcements
Option 1
X
Turn cVd the control knob during a
traffic announcement or a navigation
announcement.
Option 2
X
In the "Volume Settings" menu, set the
volume for traffic announcements
(Y page 16) or for audio fadeout during a
navigation announcement (Y page 16).
Adjusting the volume for phone calls
Option 1
X
Turn cVd the control knob during a
phone call.
i
The volume is set to the default value
again for the next phone call.
Option 2
X
Set in the volume settings menu
(Y page 18).
Further volume settings
Further settings can be made in the volume
settings menu:
R
switch-on volume (Y page 18)
R
volume of the confirmation tone
(Y page 19)
R
click volume (Y page 19)
Adjusting the sound settings
Introduction
You can adjust the balance, treble and bass,
as well as the X-bass in the audio settings
menu.
With the Balance function, you can control
whether the sound is louder on the driver's
or front-passenger side.
X-bass can be used to increase the bass by
up to six levels for a selected frequency
(32 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz).
Adjusting the balance
X
Call up the audio settings menu
(Y page 82).
X
Press Balance.
X
Press = or Ì to set the sound focus
point.
X
Press OK.
The settings are stored and you exit the
menu.
Setting treble and bass
X
Call up the audio settings menu
(Y page 82).
X
Press Bass/Treble.
16
>> smart high line radio.