SMART high line radio - Setting the Language; Selecting a Keyboard; Setting the Standby Time

X
Press OK.
The setting is accepted.
X
Press &.
The screen settings menu appears.
Setting the brightness
X
Call up the screen settings menu
(Y page 19).
X
Press Brightness. The entry on the right
beside Brightness shows the current
setting.
A settings menu appears.
X
Press = or Ì to select a value for
the brightness.
X
Press OK.
The setting is accepted.
Selecting a color scheme
X
Call up the screen settings menu
(Y page 19).
X
Press Background style. The entry on
the right beside Background style
shows the current setting.
A menu appears.
X
Select the desired color scheme.
X
Press OK to confirm the selection.
The display appears in the selected color
scheme.
Clock settings
Introduction
The smart high line radio sets the time
automatically if it has sufficient GPS
reception.
You can also set the time manually (e.g. if
there is no GPS reception or the reception
is insufficient). However, the time that you
enter will be overwritten when there is GPS
reception. The time zone and summer time
settings are not changed.
Calling up the "Time entry" menu
X
Press Extras in the main menu
(Y page 8).
X
Press Options in the menu.
The general settings menu appears.
X
Press Clock settings.
Setting the time
The time is shown in the status bar in the
radio display.
X
Call up the "Time entry" menu
(Y page 20).
X
Press Edit time.
X
Press the available numbers (shown in
white) one after another.
The colon between the hours and minutes
is entered automatically.
X
Press OK.
The setting is accepted and the "Time
entry" menu appears.
20
>> smart high line radio.