SMART high line radio - Switching Navigation Mode On;Off

X
Press = or Ì to adjust the standby
time. You can select values between 1 and
24 h.
X
Press OK.
The smart high line radio accepts the
value and switches back to the system
settings menu.
Changing the security code
Entering a four-digit security code serves
to protect against theft. The security code
must be entered after disconnecting the
battery, for example.
The security code is set to "0000" at the
factory. It is recommended that you change
the security code.
X
Call up the system settings menu
(Y page 21).
X
Press Security code.
An input menu appears for the entry of the
current security code.
X
To enter the current (old) code: press the
numbers one after another.
X
Press OK to confirm the entry.
An input menu appears for the entry of the
new security code.
X
To enter the new code: press the numbers
one after another.
X
Press OK to confirm the entry.
The Please confirm again entry prompt
appears.
X
To confirm the new code: enter the new
code again and press OK.
The New code saved message appears.
The new security code is requested when
the smart high line radio is switched on
again.
Calibrating the touch screen
The touch screen is calibrated before
delivery. Recalibrate it if it no longer
responds precisely to your entries.
X
Call up the system settings menu
(Y page 21).
X
Press Touch calibration.
An entry prompt is shown.
X
Press the cross.
The cross moves across the screen.
X
Repeat this action until the system
settings menu appears.
Loading the factory settings
You can reset the smart high line radio to
the factory settings. Amongst other things,
this will delete all personal data (e.g.
station presets, entries in the destination
memory and in the list of previous
destinations in the navigation system,
phone book entries). Resetting is
recommended before handing over or
selling the vehicle, for example.
X
Call up the system settings menu
(Y page 21).
X
Press Factory settings.
The Please confirm to load the
factory settings entry prompt
appears.
X
Press OK.
To cancel the reset to factory settings:
press &.
>> smart high line radio.
23
Z