Video
Video mode
Safety note
G
Risk of accident
Only when the vehicle is stationary should
you:
R
insert a data carrier
R
eject a disc
There is a risk of being distracted from the
road and traffic conditions if you insert or
eject a disc while the vehicle is in motion.
DVD playback conditions
If video DVDs do not conform to the NTSC or
PAL TV standards, they may create picture,
sound or other problems during playback.
The smart high line radio can play back
video DVDs produced according to the
following standards:
R
region code 1 or region code 0 (no region
code)
R
PAL or NTSC standard
You will generally find the relevant
details either on the DVD itself or on the
DVD case.
i
The smart high line radio is set to
region code 1 at the factory.
i
If you insert a video DVD with a
different region code, you will see a
message to this effect.
Function restrictions
If you would like to use the video function,
you first need to:
X
switch off the navigation (Y page 26).
X
Shift the transmission to position P (see
vehicle Operator's Manual).
The video image is hidden during the
journey. The For safety video watching
is not possible while driving or
navigating ! message appears.
Data medium for video mode
The following data media can be used for
playback:
R
Video DVD, video CD
R
DVD-R/RW, CD-R/RW with video files
R
USB device
R
SD/MMC memory card
Switching video mode on
Option 1: inserting or connecting a data
medium
X
Insert a video DVD/video CD (Y page 71).
or
X
Insert an SD/MMC memory card
(Y page 72).
or
X
Connect a USB device (Y page 74).
The data medium is read.
X
To start playback: playback starts
automatically for video DVDs/video CDs.
For all other data media, press ; in
the basic display (Y page 85).
Option 2: selecting a data medium in the
video main menu
A data medium is inserted or connected to
the smart high line radio.
X
Press Video in the main menu (Y page 8).
The Video main menu appears.
84
>> smart high line radio.
To Next Page
Loading...
