SMART high line radio - Determining a Master Device; Automatic Reconnection; To De-register a Mobile Phone

Example 2: the mobile phone is connected and
supported Bluetooth
®
features are displayed
:
To disconnect the mobile phone
;
Determining a master device
=
To de-register a mobile phone
i
The supported Bluetooth
®
features are
displayed after a Bluetooth
®
audio
device is connected.
In this display, the mobile phone can be:
R
determined as a master device
(Y page 58)
R
de-registered (Y page 58)
R
disconnected from the smart high line
radio
X
To disconnect a mobile phone: press
symbol :.
The mobile phone is no longer connected
to the smart high line radio but is still
entered in the telephone device list and
can be connected again later.
Determining a master device
You can determine a mobile phone as a
master device, but not a Bluetooth
®
audio
device. A master device is given priority
when reconnecting automatically.
X
Press symbol ; in example 2.
The selected mobile phone is entered in
the telephone device list as a master
device.
Automatic reconnection
The smart high line radio searches for a
master device automatically when it is
switched on. If no master device has been
determined, the telephone list is searched
for a mobile phone and the Bluetooth
®
device list is searched for an audio
device.
To de-register a mobile phone
You can either de-register an individual
mobile phone or delete all mobile phones
from the telephone device list.
Bluetooth
®
audio devices can be deleted
from the corresponding display in the same
way.
X
To de-register a mobile phone: press
= in example 2.
The Please confirm to delete message
appears.
X
Press OK.
The Deleted message appears.
The mobile phone display shows a
message that connection with the smart
high line radio was terminated.
X
To de-register all mobile phones: press
1 in the telephone device list.
Please confirm to delete all.
X
Press OK.
The Deleted message appears.
58
>> smart high line radio.